Insulated Solar Kit 5000W 48V 20,000Wh / day. Bat OPzS.

Insulated Solar Kit 5000W 48V 20,000Wh / day. Bat OPzS.

12 x 340W to 24V Polycrystalline Solar Panels, it is one of the most powerful in the 24V polycrystalline range, it is most used for medium and large size installations in country houses, houses and industrial buildings, used in both for isolated and grid-connected systems for its excellent value for money. It is made up of 72 polycrystalline silicon cells, with high performance levels. The 340W 24V ERA solar panel offers impressive performance between panels

24V solar cells and 72 cells, producing a maximum current of 8.84A at 38.5V. It incorporates 90cm of 4mm section cable with a standard MC4 connector at the end of each pole for easy connection.

1 x Must Solar 5000W 48V inverter charger + charge controller with MPPT: offers a very useful solution for isolated photovoltaic systems, because it allows to integrate all the components of the system in the same device, which also integrates an LCD screen that you will allow you to see the state of charge and voltage of the battery, the real-time charge amps of solar panels and point of sale, in addition to having a small drawing on the same screen that will allow you to see how the energy is circulating in the system because it also supports a generator or an electrical network the external support that we can have in the solar installation.

Investor is pure sine wave, the battery charger has a maximum load 60A with automatic actuation AGS contact a voltage regulator

MPPT charge 80A to be able to connect up to a maximum of 4000W solar energy.

24 x Stationary Battery 2V Ultracell OPzS 588Ah: This type of battery, model UZS590-2, is the best solution for photovoltaic systems since it offers great durability and very good performance for slow loads and downloads. These batteries are the best type of power bank for a solar kit that you need for successful operation for many years. Widely recognized, Ultracell is the world's leading manufacturer of premium quality long-life batteries. Reliable, robust and durable, thanks to more than 3000 life cycles offered by these stationary batteries for discharges up to 50%.

1 x Structure on metal roof or sloped roof: The structure on a metal roof or sloped surface is perfect for occasions where the ceiling of the installation site has an optimal orientation and inclination. It can be a metal surface, a sandwich panel or a concrete surface, since this structure essentially consists of a few stringers to position the panels. The structure that we include for this solar kit includes all the material necessary for the assembly of the solar panels, except what is necessary to anchor its own to the roof or to the ground, since it will be according to this surface. .

The structure has a very simple assembly manual. If you need another type of structure in your kit, contact us so that we can budget and change according to your needs.

15 meters of red PV ZZ-F 6 mm2 cable and 15 meters of black PV ZZ-F 6 mm2 cable. from the Top Cable brand.

10 meters of Red PV Cable ZZ-F of 10mm2 and 10 meters of Black PV Cable ZZ-F 10mm2

It is used in solar installations between the panels to make the parallels in the current distributor or to bring the energy of this one to the charge regulator. It has a double halogen-free rubber coating with high resistance to chemicals, oils, ultraviolet rays and resists immersion in water. It is a flexible class 5 cable prepared for low voltage up to 1000V. Its conductor is electrolytically tinned copper, and thanks to the design of its materials, it can be installed in all kinds of environmental conditions: wet and dry areas, outdoor installation, buried, or even submerged in water (AD8) , without which compromises the life of the cable.

1 meter of ZZ-F 50mm2 Green Cable and 1 meter of 50mm2 RV-K Black Cable. It is used in solar installations as a transport cable for current between the battery and the inverter. The current flowing through it can be very high between the batteries and the inverter, causing overheating if a cable of insufficient section is used.

50 mm2 cable is from the Top Cable brand, and although it is normally distributed with a length of 1 meter, since the distance between the batteries and the inverter should not be high, it may be requested to measure larger distances. The cable has moderate flexibility and is designed to meet the most demanding demanding requirements.

The cable should normally be crimped with terminals of the appropriate metric e depending on the UPS hardware and batteries. Thanks to the design of its materials, it can be installed in all kinds of environmental conditions, both in wet and dry areas, without harming the tool cable life.

1 x Distributor and waterproof box for the connection panels: To make the parallel panels in a simple, reliable and extendable way, the 2-pole distributor and its waterproof box are fixed. It must be placed as close as possible to the group of solar panels in order to join the wiring of all in a single pair of positive and negative cables. In this way, we can make a descent of only one cable per pole to the charge controller (this branch cable will be longer than section than that installed between the solar panels and the current distributor, since the sum of the currents of all the modules will pass through it photovoltaic.It is very useful because it allows for clean installations with significant savings in cabling.

12 MC4 panel connectors. This is a terminal compatible type of connector that is already included in the solar panel. To the MC4 male and female terminals, a metal rod is inserted into the plastic body of the connector. A piece of cable equivalent to 1 cm must be stripped and attach it to the metal tab. It is inserted inside the connector body until we hear a click. At this stage, we will know that the connector has been correctly installed because if we pull the cable lightly it will no longer come out.

1 x 3000W 60 A 24V electrical equipment kit: contains all the elements and protection devices required for the kits incorporating the 3000W to 24V inverter. This plugin not only facilitates the installation of each item in the kit, as it comes pre-assembled to reduce time and hassle during installation. In addition, it protects your installation since

Includes: a battery switch, a fuse to connect the panels and a 16A circuit breaker for the output power.

Includes an ICP box to install protections, wiring that connects all devices and leave a male plug ready in case we want to connect a generator or network to the input of the battery charger inverter

Solar Kit Off Grid 5000W 48V 20,000Wh / day with OPzS battery.
The Solar Kit Permanent Housing 5000W 48V 20000Whdia is about a system to be able to supply the consumption of a
habitual residence, frequently used or permanent residence, thanks to its OPzS accumulators and 12 panels of the largest
Powerful.
All this governed by an inverter of 5000W at 48V with an 80A MPPT regulator to supply all consumption in housing.
In addition to the material discussed, the following are attached electrical accessories that you can see on this page being able to make the different connections between the teams.
Energy production:
Energy captured in one day: 12,240 Wh / day in winter and 28,650
Wh / day in summer. The production estimate was taken with
a minimum of 3 hours of maximum sunshine for the winter, while in the summer 7 hours of sunshine was taken.
Consumption: Common examples that this kit can cover.
1 x Refrigerator A +++
1 x Chest freezer A +++
1 x Flat TV 75W for 8h / day
2 x Laptops for 6h / day
1 x dishwasher 3 times a week
1 x microwave
8 x 10W Led Lights for 4h / day
1 x Washing machine 3 times a week (with cold water)
1 x ceramic hob 1h / day
1 x oven for 3 hours per week
1 dryer 1200W: 3 times a week
1 x 1HP well pump 1h / day
1 x air conditioning inverter 5h per day summer (solar hours)
1 x Fan 6h / day in summer
UPS standby consumption up to 5000W