Electric lint remover
- Measures: 13x7x6 cm.
- Accessory for high level shaving. This accessory makes the distance between the fabric and the blades greater.
- Safety system against inadvertent operation.
- Stainless steel razor grid.
- Power switch.
- Detachable lint container.
- Includes brush for easy cleaning.
- Easily removes lint, balls and scratches from fabrics and clothing.
- Instructions for use:
> Make sure that the switch is in the off position and the grill is properly anchored. (If it is not well anchored and the appliance's safety system is stopped, it will prevent it from starting.)
> slide the switch to position "1", The appliance will start to operate.
> Pass over the surfaces of the fabric without pressing excessively.
> It is advisable to test beforehand on an inconspicuous area of the garments.
> Depending on the fabrics that go to shave you can put the separator. This accessory increases the distance between the fabric and the blades.
- Maintenance and cleaning
> use a dry cloth for cleaning.
> do not use chemical products or abrasives that may damage the surfaces.
> to remove the fluff from the device, remove it by sliding it out in the direction of the arrows and empty the content.
> to replace the tank, carry out the reverse operation. < br / >> With use, a residue of lint may remain between the grill and the blades. To remove it, remove the grill by turning it counterclockwise. Remove dirt carefully as the blades are very sharp.
> Replace the rack by turning it clockwise until it stops.