Tecna RCE 7100 EC/V heat recovery unit flow rate 7400 m³/h

Tecna RCE 7100 EC/V heat recovery unit flow rate 7400 m³/h

They include as standard a wall control with LCD screen, from which you can manage manual/automatic modes and control the rotation speeds of each fan, the bypass damper or an external water coil.

It has several connections, both analog and digital, to expand the automatic operation options by connecting accessories such as CO2 probes, which allow the recuperator to proportionally and automatically vary the flow rate delivered according to the ppm CO2 concentration of the extraction air.

It can manage up to 32 heat recovery units from the Tecna RCE-EC series using the Modbus RTU protocol, via the RS485 port, in addition to being integrated via this communication protocol in a superior BMS regulation.

Double filtration F7+F8 for RITE compliance.
Envelopes in sandwich panels with 25 mm PU or mineral wool insulation.
The equipment is supplied as standard with a roof provided for this purpose.
From size RCE 7100, they incorporate a tubular structure in extruded aluminum.
Aluminum plate heat exchanger.
Motorized bypass as standard.
Inlet and return temperature sensors.
Signaling of clogged filters by differential pressure switch

Commercial/industrial use by a recycler
Single-phase power supply
Maximum air flow 7400 m3/h
RCE-EC vertical ventilation series
Thermal efficiency 73%
Power consumption 4340 W
Height of indoor unit 2250 mm
Width of indoor unit 2150 mm
Depth of indoor unit 1110 mm
weight 550 kg