Mader Lawn Mower, Tractor 17.5 HP, 1,000 mm

Mader lawn tractor 17.5 HP, 1000 mm

Info, how to implement it
Open the vent valve on the fuel tank cap.
The operator must be seated.
Brake pedal depressed and secured.
The blade activation switch must be in the “OFF” (0) position.
The throttle lever should be fully raised (closing air to the carburetor).
The travel pedals (R/F) must be in the “neutral” position.
Turn the ignition key.
The engine starts.
Lower the throttle to the hare position.

Traction, block traction
Pull the lever at the bottom center of the rear of the tractor. If we push the lever inwards we unlock the traction (this mode allows the tractor to be moved with the engine off).

Blade drive
Place a collection basket (for the blades to work, the collection basket must be in place).
Place the switch located on the right side of the steering wheel in the “ON” position (1).
In "reverse", the blades turn off.
To move backwards when mowing grass, you must press the right side push button near the rear of the tractor.

Briggs & Stratton engine, 4175 EX
1 cast iron cylinder
Electric starter
Automatic gearbox
Double blade
Self-cleaning deck
6 cutting levels

Transmission: Hydrostatic propulsion
Power take-off and electric power take-off
Start: Electric
Speed: "R" (4.5 km/h) - "1" (8.8 km/h)
Specifications: Turning radius: 450 mm
Cut: 1000 mm
Cut (height): 30 - 90 mm
Blade: 520 + 520 mm
Discharge: Rear
Platform: Steel
Specifications: Welded chassis
Wheel: Front: 15x6.00-6 (x2)
Back: 18x8.50-8 (x2)
Fuel tank: 7.5 L
Oil tank: 1.1 liters
Noise: 100 dB(A)
Area (max): 5000 m2
Battery: 12 V, 18 A (180 x 85 x 165 mm).
Brightness: Front work light
Contains: Side bottle holder
Engine: 4T - Gasoline 95
Displacement: 500 cc
Power: 17.5 hp

Packaging
Height: 198cm
Width: 113 cm
Length: 98cm
Gross weight: 250 kg
Net weight: 220kg