Ferroli TL series draft regulator thermostat
Insert the chain lever at a slight downward angle into the hole in the caliper, pushing out the pin. Adjust the lever laterally so that the chain is in alignment with the draw door attachment, immobilize the lever by tightening the fixing screw.
The regulator is preset for vertical mounting, for horizontal mounting place the button on position 30 then remove it by pulling and shift it by 180° before fitting it again
To adjust the length of the chain, place the button on your 60 graduation. When the water temperature reaches 60° C, adjust the chain so that the draft door maintains an opening of approximately 1 mm
Element thermosensitive to the expansion of liquids
Easy installation, in horizontal or vertical position
Regulation range from 30 to 100ºC with double scale