KCVENTS VT50 WIFI heat recovery ventilation system

KCVENTS VT50 WIFI heat recovery ventilation system

It provides good quality air and solves ventilation problems limited to a single room or a small house.

Eliminates condensation problems in winter
Prevents excessive indoor humidity and mold buildup

Reduces heat loss from the air conditioning system
Take care of the indoor fresh air supply and the exhaust of stale air.

Characteristic
Duct diameter: 160 mm
Duct extension: 250-500mm
Voltage: 110-240V 50/60HZ
Sound level: 22 - 32 - 39dB
Application temperature: -20°C to + 50°C
IPX3 waterproof and dustproof
With built-in humidity sensor, select humidity mode to control fan speed.
Magnetic mounting plate for easy installation and maintenance
Optional HEPA filter to further purify the air, trap viruses, bacteria and PM2.5

More smart operations in the app
Monitor indoor temperature and humidity in real time
Remote selection of work modes
Fan time setting
Control indoor humidity
Control multiple devices at the same time

Principle of operation of the VT501
Cycle I. Warm stale air is drawn in from the room, then passes through the ceramic energy tank and, passing through it, heats and humidifies the ceramic tank by transferring heat energy.

After a while, as the ceramic heat exchanger heats up, the fan will automatically switch to power mode.

Round II
Fresh, clean air from outside passes through the ceramic energy reservoir, absorbs humidity and warms to room temperature due to the accumulated heat.

When the temperature of the accumulator drops, the fans switch off and the cycle is repeated.

The ventilator changes operating mode between supply and exhaust every 65 seconds.

Energy saving
2W minimum and 6W maximum working power, 28 CFM to 35 CFM suitable for room

Quiet operation
Max 30 dB thanks to high performance brushless motor and sealed wall design

Three ventilation modes
Fresh air mode, exhaust mode, cycle mode with humidity control and H11 level purifying filter to create a comfortable space

Remote
Comes with a working remote control, easy to operate the fan as you wish

Contents
1 heat recovery unit.
G3 filters and 1 ceramic core.
Remote control unit
1 piece of magnetic mounting plate
1 instruction manual