Edenox SFG-60 E Gas Fryer

Edenox SFG-60 E Gas Fryer

With an all-stainless steel construction, this range of Edenox gas fryers integrates perfectly with other equipment of the same dimensions, such as cookers and griddles, ensuring a uniform aesthetic and a visually harmonious combination in any project, these fryers are designed for small and medium-sized installations.

Available in models with 1 and 2 deep-drawn tanks, with widths of 400 mm and 600 mm respectively.
Heating by steel burners with optimized combustion with pilot flame and thermocouple, controlled by a solenoid valve with safety thermocouple and automatic ignition.

Large cold zone that prevents frying residues from entering into circulation with the hot oil, thus preserving it for longer, it incorporates a filter grid and an oil drain tap with safety lever on the front, a removable elbow pipe is supplied to facilitate emptying of the tank and its cleaning, they are supplied assembled with injectors for natural gas, if the installation is not prepared for this gas, butane/propane gas (LPG) injectors are incorporated inside the package.

Thermostatic temperature control from 60 to 195 ºC
Heating type: Gas
Gas type: GN
Number of tanks: 2
Number of baskets: 2
Capacity in liters: 16 liters
Regulator: NG G20/G25/G25.1 20/25/25 mbar
Flow rate G25.1: 1,604 KGH
Net height: 445 mm
Net width: 650 mm
Net length: 600 mm
Gross/packed weight: 50 kg
Gross/packed height: 600 mm
Gross/packed width: 720 mm
Gross/packed length: 655 mm